- * Description:
-
This is a high-performance PLA composite material developed and produced by our company
based on PLA resin. It is green, safe, and environmentally friendly, designed specifically for extrusion
applications. It offers excellent performance and stable processing.
This Matte PLA Resin 's key features include 100% uniform line alignment, excellent toughness,
a high matte finish, and minimal die flash. It is suitable for high-speed 3D printing at speeds
of 30-500 mm/s and is specifically designed for extrusion of high-speed matte 3D printing products.
- * Product introduction video
-
- * Print model
-
Items | Test method | Unit | Value |
Density | ISO 1183 | g/cm3 | 1.35 |
Melt index | ISO 1133 | g/10min | 8-12 |
Melting point | ISO 11357 | ℃ | 155-175 |
Tensile Strength | ISO 527 | MPa | 52 |
Tensile modulus | ISO 527 | MPa | 4050 |
Elongation @ break | ISO 527 | % | 12 |
Bending Strength | ISO 178 | MPa | 83 |
Flexural modulus | ISO 178 | MPa | 3900 |
Notched impact strength | ISO 179 | KJ/m2 | 6.4 |
Unnotched impact strength | ISO 179 | KJ/m2 | 8.8 |
Heat Deflection Temperature | ISO 75 | ℃ | 60 |
Vicat softening temperature | ISO 306 | ℃ | 60 |
Note: The above data only represent general data | |||
Note: This Matte PLA Resin undergoes rigorous drying at the factory. The dried resin has a moisture content of less than 500ppm and is stored in vacuum-packed aluminum foil or PE bags. Due to its high water absorption and degradation, unused material must be sealed to prevent moisture absorption. This can cause the resin to increase its melt index, become brittle in finished products, and develop surface bubbles during use.
Drying Conditions: 65°C for 3-4 hours under forced air drying.
Extrusion Conditions: Depending on the extrusion equipment, the recommended processing temperature is 165°C-190°C.
-
Download Materials
