PLA
Product description, mainly related to the product introduction and some table parameters, can be combined with graphics and text, and the content can be added, modified and deleted in the background column content management. Products can customize fields, and support dynamic fields and product subsidiary table information. Greatly enhance the practicality and applicability of the system, you are welcome to use it!
Color:
Net Weight：
Personal Purchase:
- * Description:
-
Description
A low-cost basic printing consumable based on modified PLA. While maintaining its environmental characteristics, the added special materials enhances the fluidity and fast printing performance of PLA-basic, allowing its maximum volume flow rate to reach about 30mm³/s under the printing conditions of a Bambu P1 series machine with 0.4mm nozzle. PLA-basic material is easy to print, does not produce irritating odor, it is not easy to draw, the finished product does not warp, and has good molding quality. It is a cost-effective choice among 3D fast printing consumables.
Sellingpoint
High Speed Prining
Easy to PrintCost-effective
- * Product introduction video
-
- * Print model
-
| Density(g/cm3) | 1.24 |
| Melt Flow Index | 3.5-4.5（190℃/2.16KG） |
| Heat Distortion Temp(℃,0.45MPa) | 50-60 |
| Tensile Strength(MPa) (XY) | 63.95 |
| Tensile Strength(MPa)(Z) | 28.29 |
| Elongation at Break(%)(XY) | 4.17 |
| Elongation at Break(%)(Z) | 2.41 |
| Flexural Strength(MPa)(XY) | 101.2 |
| Flexural Strength(MPa)(Z) | 40.5 |
| Flexural Modulus(MPa)(XY) | 3085.87 |
| Flexural Modulus(MPa)(Z) | 2832.46 |
| IZOD Impact Strength(kJ/㎡)(XY) | 3.09 |
| IZOD Impact Strength(kJ/㎡)(Z) | 2.15 |
| Extruder Temperature(℃) | 210-230℃ |
| Bed temperature(℃) | 45 - 60°C |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | 40-300mm/s |
| Heated Bed | Need |
-
Download Materials
